Abstract The aim of this study was to analyze the structural, morphological and mechanical properties of two different lithium disilicate glass-reinforced ceramics for CAD-CAM systems (IPS e.max CAD and Rosetta SM). Five methodologies were used for both ceramics: microstructure (n = 2) was analyzed using...
Análisis de Varianza,
Cerámica/química,
Diseño Asistido por Computadora,
Recubrimiento Dental Adhesivo/métodos,
Porcelana Dental/química,
Resistencia Flexional,
Vidrio/química,
Ensayo de Materiales,
Microscopía Electrónica de Rastreo,
Porosidad,
Valores de Referencia,
Reproducibilidad de los Resultados,
Cementos de Resina/química,
Resistencia al Corte,
Propiedades de Superficie,
Difracción de Rayos X
Abstract The aims of the present study were to compare conventional radiography, radiographs digitized with a scanner or photographic camera, and digital radiography, used to evaluate the radiopacity of endodontic materials, and to compare the accuracy of linear and quadratic models used to convert radio...
Introdução: Novas formulações de materiais vítreos apresentaram atividade antimicrobiana e osteoindutora. Objetivos: O objetivo deste estudo foi avaliar a citotoxicidade e a biocompatibilidade de soluções produzidas a partir de novas formulações de biovidros, o F18 (biovidro experimental) e o F1...
Abstract Objective: To compare the fluoride release from Conventional Glass Ionomer Cement (GIC), Resin Modified GIC (RMGIC), and Cention N Alkasite Material. Material and Methods: Forty- five disc-shaped specimens of three different restorative materials (Conventional GIC, RMGIC, and Alkasite material...
Abstract This in vitro study aimed to evaluate the effects of different luting protocols on the thickness of luting interface of ceramic laminate veneers. Thirty-six lithium disilicate blocks (7 × 8 × 0.6 mm) were cemented onto bovine enamel. They were divided into 6 groups based on the luting protocol...
Abstract The composition of infiltrants can influence their physical properties, viscosity and depth of penetration (DP). Strategies are used to increase the DP, such as the addition of diluents or the use of heat. This study aimed to evaluate the effect of preheating and composition on physical properti...
Menezes-Silva, Rafael;
Oliveira, Bruna Medeiros Bertol de;
MagalhÃes, Ana Paula Rodrigues;
Bueno, Lígia Saraiva;
Borges, Ana Flávia Sanches;
Baesso, Mauro Luciano;
Navarro, Maria Fidela de Lima;
Nicholson, John Willian;
Sidhu, Sharanbir Kaur;
Pascotto, Renata Corrêa.
Abstract The objective was to evaluate the compressive strength (CS), diametral tensile strength (DTS), flexural strength (FS), and Knoop microhardness (KH) of different conventional restorative glass-ionomer cements (GICs) and to correlate these mechanical properties (MP) with the stabilization time (ST...
Análisis de Varianza,
Fuerza Compresiva,
Resistencia Flexional,
Cementos de Ionómero Vítreo/química,
Pruebas de Dureza,
Ensayo de Materiales,
Valores de Referencia,
Reproducibilidad de los Resultados,
Auto-Curación de Resinas Dentales/métodos,
Espectroscopía Infrarroja por Transformada de Fourier,
Resistencia a la Tracción,
Factores de Tiempo
Khabadze, Zurab;
Kulikova, Alena;
Abdulkerimova, Saida;
Bakaev, Yusup;
Bakaev, Yunus;
Todua, David;
Mordanov, Oleg;
Adzhieva, Anzhela;
Davreshyan, Georgy;
Solimanov, Shamil;
Nazhmudinov, Shamil.
Abstract Objective: To evaluate the effect of pre-polymerization heating of nanocomposite filling materials on their strength properties within one manufacture group. Material and Methods: Two nanocomposite filling materials Enamel Plus HRi Universal Dentin® and Universal Enamel® were used. The linea...
Aim: Bulk Fill composite resins were released on the market in order to reduce the time in clinical sessions by using increments of up to 5.0 mm thickness. The aim of this study was to evaluate the effect of the rinsing solutions on the surface roughness of the conventional composite and Bulk ...
The central nervous system shows limited regenerative capacity after injury. Spinal cord injury (SCI) is a devastating traumatic injury resulting in loss of sensory, motor, and autonomic function distal from the level of injury. An appropriate combination of biomaterials and bioactive substances is curre...
Sistema Nervioso Central/efectos de los fármacos,
Modelos Animales de Enfermedad,
Ensayo de Materiales,
Microfibrillas/química,
Microscopía Electrónica de Rastreo,
Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química,
Ratas Wistar,
Traumatismos de la Médula Espinal/terapia,
Ingeniería de Tejidos/métodos,
Andamios del Tejido,
Ácido Valproico/administración & dosificación
