Results: 52

Comparative Assessment of Contact Osteogenesis at the Titanium Implant-Bone Junction in Male Rabbits with Dissimilar Femoral Defects

Int. j. morphol; 41 (5), 2023
SUMMARY: Traumatized bone tissue has the capacity to repair itself so that it eventually regains its almost original form, even in the case of artificially inserted implants. The process that stays at the base of the regeneration is represented by osteogenesis or remote osteogenesis. The major difference...

The influence of haematogenous bone marrow on the early osseointegration of a titanium implant which penetrates the endosteum

Int. j. morphol; 40 (1), 2022
SUMMARY: The utility of metallic bio-medical implants in osseous or dental affections is irrefutable. The paper aims to test the tolerance of the bone marrow to titanium implants. Titanium implants were inserted in the femur of 11-months old rabbits. The implants penetrated the endosteum, half of their l...

Cyclic Fatigue Resistance and Surface Roughness of Rotary NiTi Instruments after Simulated Clinical Use in Curved Root Canals - An Atomic Force Microscopy Study

Abstract Objective: To examine the cyclic fatigue resistance and surface topography of TruNatomy and ProTaper Gold nickel-titanium rotary files and evaluate the presence of alterations to surface topography following instrumentation in simulated curved canals. Material and Methods: Twenty-four nickel-t...

Enhanced osseointegration of porous titanium scaffold implanted with preload: an experiment study in rabbits

Int. j. morphol; 38 (4), 2020
Porous titanium alloy scaffold was widely used in treating bone defect caused by traumatic injury and osteomyelitis, which was incapable of self-healing. The implantation of scaffold produced stress shielding thereby forming osteolysis. The objective of this study was to analysis trabecular morphological...

Effect of focal adhesion kinase inhibition on osteoblastic cells grown on titanium with different topographies

J. appl. oral sci; 28 (), 2020
Abstract Objective The present study aimed to investigate the participation of focal adhesion kinases (FAK) in interactions between osteoblastic cells and titanium (Ti) surfaces with three different topographies, namely, untreated (US), microstructured (MS), and nanostructured (NS). Methodology Osteo...

Extrusión Apical de Barro Dentinario e Irrigante Producidos por Dos Sistemas de Instrumentación de Níquel Titanio al Utilizar Irrigación Pasiva o Activa

RESUMEN: El barro dentinario producido durante tratamiento endodóntico puede ser extruido hacia el tejido periradicular junto con el irrigante, produciendo inflamación y dolor postoperatorio. Comparar la cantidad de extrusión apical de barro dentinario e irrigante, producido durante la preparación qu...

Effect of stem cells combined with a polymer/ceramic membrane on osteoporotic bone repair

Abstract Cell therapy associated with guided bone regeneration (GBR) can be used to treat bone defects under challenging conditions such as osteoporosis. This study aimed to evaluate the effect of mesenchymal stem cells (MSCs) in combination with a poly(vinylidene-trifluoroethylene)/barium titanate (PVDF...

A novel application of nano eggshell/titanium dioxide composite on occluding dentine tubules: an in vitro study

Abstract To synthesize Nano eggshell-titanium-dioxide (EB@TiO2) biocomposite and to evaluate its effectiveness in occluding opened dentine tubules. EB@TiO2 was synthesized and characterized using X-ray diffraction (XRD), and Transmission Electron Microscope (TEM). Sixteen simulated bovine dentine discs w...

Cyclic fatigue resistance of novel Genius and Edgefile nickel-titanium reciprocating instruments

Abstract: This study aimed to assess the cyclic fatigue resistance of Genius and EdgeFile X1 reciprocating instruments compared with WaveOne Gold Primary. Twenty Genius (Ultradent) 25.04, 20 Genius 30.04, 20 EdgeFile X1 (EdgeEndo) and 20 WaveOne Gold Primary (Dentsply Maillefer) instruments were included...

Additive manufacturing of titanium alloy could modify the pathogenic microbial profile: an in vitro study

Braz. oral res. (Online); 33 (supl.1), 2019
Abstract Additive manufacturing (AM) is an emerging process for biomaterials and medical devices. Direct Laser Metal Sintering (DLMS) is an AM technique used to fabricate Ti-6Al-4V implant materials with enhanced surface-related properties compared with wrought samples; thus, this technique could influen...